3/2/2024 0 Comments Cad path tutorialPlace your pointer on the inner round edge of flange bushing and click to place the Coord. This will make it easier to place the Coord. Right-click on the top slide part and clear the Show check box to hide the part. To prepare your parts and import them into MapleSim: The following section demonstrates how to add matched ports in the Feature Detect window. This section shows you how to add matched ports in the CAD Toolbox window. Ports can be added during import in the CAD Toolbox window (current window) or after the parts have been imported into MapleSim in the Feature Detect window (for individual parts). Reference Coords ensure that the geometry of your CAD assembly is preserved and that your model simulates accurately. Reference Coords are necessary when you have to connect two CAD subsystems to the same component. In particular, this section demonstrates how to add a reference Coord. Ports are needed in order to connect your CAD subsystems to other modeling components. When the parts are converted to CAD subsystems, the Coords are converted to Multibody ports (or, simply, ports). You will prepare the parts by adding local coordinate systems (Coords) to them. This section covers how to prepare parts and groups so that they can be converted to CAD subsystems for use in MapleSim. For more information on part properties, see Setting Part Properties. To set the properties for a part, select the part and click Properties ( ) or press P. Similarly, you can move a part out of a group by either dragging it onto another group or dragging it out to the main assembly (which in this example is PickAndPlace ).Įach part has properties such as material (density), color, and translucency that you can set. You can add a part to a group by dragging the part onto the group in the Tree View. Create a group named Link using Create Group ( ) in the toolbar and replicate the Tree View shown in the figure. Notice that gear motor is now part of the Base group.Ħ. The Tree View should resemble the following figure. Base has five children, frame and four bushing bolt subassembly. The Tree View updates to include the new Base group. Alternatively, you can click Create Group ( ) in the toolbar. Right-click on frame and then select Create Group. In the Tree View on the left of the CAD Toolbox window, Ctrl -click on frame and the four bushing bolt subassembly groups. You will create groups from the parts in the assembly. The grouping of parts (that is, creating groups) merges parts into a single body when importing them into MapleSim. Now at any time you can restore this saved view of the model by pressing R. See Panning, Zooming, Rotating, Viewing the Entire Model, and Focus on Selected for more information on these view controls. Press Esc to exit any of these view modes and return to select mode ( ). Alternatively, the Pan ( ), Zoom ( ), Rotate ( ), and View All ( ) view modes can be used to orient the CAD assembly. You can change the view by using the left mouse button click-and-drag to rotate, the right mouse button click-and-drag to pan, and the middle mouse button click-and-drag to zoom. Orient the CAD assembly in the CAD Workspace to show the view above. When the import process is finished, the parts included in the assembly are shown in the CAD Toolbox window. The CAD Toolbox window opens and a progress bar shows import progress. Select the PickAndPlace.step CAD file, and then click Open. If you installed Maple in a different location, replace C:\Program Files\Maple \ with the correct location. Note: This assumes that your Maple installation directory is C:\Program Files\Maple \. Where is the major release version for Maple, for example, 2019 step file by performing the following tasks:Īdd Coords and then import the CAD subsystems into MapleSimįrom the File menu, select Import CAD.Ĭ:\Program Files\Maple \toolbox\CadToolboxPro\examples In this tutorial, you will build a pick and place mechanism from a. Tutorial: Building a Pick and Place Model with the CAD Toolbox
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |